联贸医疗用品技术(上海)有限公司
联贸医疗用品技术(上海)有限公司 髋关节系统
当前位置: 主页 > 产品展示 > 髋关节系统 >
  
  HA/Ti电浆涂布股骨柄
      HA/ Ti 股骨柄被覆表面

颈干角

表面抛光/远端凹槽

U2 Ti 珠结式股骨柄

U2 骨水泥式股骨柄

U2 HA/Ti电浆涂布及
U2Ti珠结式髋臼杯


U2 全髋内衬
 
 
     
 
 
  U2 股骨柄的尺寸矩阵-多重尺寸选择
 
   
There are fourteen sizes with eight distal diameters and seven proximal diameters which build a Matrix distribution, And the Stem Length from 120mm to 166mm.
 
 
  HA/TI涂覆于股骨柄表面
 
   
  1. Ti 500µm plus HA 50µm.
  2. U2 HA/Ti Hip Stem has a Ti base material plasma sprayed with
    commercial pure titanium powder to
    create rough surface and then coated
    with hydroxyapatite
    to ensure biological
    fixation.
  3. Rough surface provides Macro Fixation.
  4. HA layer provides Bone Induction.
 
 
  颈干角
 
   
It is concluded from researches that the most suitable neck-shaft angle of hip stem is between 125° and 134° , United U2 Hip Stem uses 130° neck angle which provides better range of motion. The 130° neck angle also increases hip stem offset that can effectively increase the moment arm of abductor muscles. By decreasing joint reaction force, patients will need less effort on walking the possibility of limping will be reduced, and the wear debris of polyethylene will also be decreased to prevent osteolysis.
 
 
  沟槽设计
 
   
To avoid stress shielding and increase torsion stability, United U2 Hip Stem is designed with distal 2/5 Fluted and Polished Surface. It assures initial stability, reduces micro motion, and minimizes incidence of thigh pain. The distal stem of low stiffness can help maintain the load distribution through the proximal part of stem, thus ensures long-term fixation.
 
 
  U2 Ti 珠結式股骨柄
 
 
 
  1. Ti-6AI-4V Tri-Wedge Hip Stem
  2. Seven sizes (stem length is from 126mm to 166mm)from 9mm to 15mm
  3. Proximal 1/3 dual layers porous beads coating
  4. Porous Coated, Optimum pore size Ave. 440mm
  5. Standard Moorse Tape
  6. Middle 1/3 beads blasting
  7. Distal 2/5 Polished and Fluted Design
 
 
 
  U2 骨水泥式股骨柄
 
 
   
  1. 5 sizes from 10mm to 14mm
  2. Co-Cr-Mo Tri-Wedge Forging Hip Stem
  3. Collared design
  4. The stem Length is from 110mm to 130mm
  5. Proximal PMMA spacer
  6. Distal bone cement centralizer, and bone cement stopper
 
 
 
  U2 HA/Ti电浆涂布及U2Ti珠结式髋臼杯
 
   
  1. 12 Sizes Option (O.D. 44-66mm in 2mm increment).
  2. Hemispherical Design.
  3. Ti base with Surface Coating of
    Ti Plasma Spray + HA Powders
    CP Ti
  4. HA-1st layer- Rough 500µm pure titanium powder coating.
  5. HA-2nd layer- 50µm hydroxyapatite spray.
  6. Plasma Spray-Maximum rough contact surface for bone ingrowth.
  7. Clustered Spherical Screw Holes for Variable Screw Locking Angle.
    Maximum 30° in Superior-Inferior.
    80° in Medial-Lateral.
 
 
 
  U2 全髋内衬
   
  1. 12 sizes from 44mm to 66mm.
  2. 10° hooded.
  3. 26mm/ 28mm femoral head.
  4. 4 guide posts lead to easy locking
  5. The Tapered UHMWPE Locking Rings accommodates tightly behind the Cup's specially designed Barb, it can reduce wear debris.
  6. Extended wall increase head stability.
  7. Minimum 7mm thickness of UHMWPE.
  8. Large Chamfer and Offset increase ROM.
  9. PMMA & UHMWPE Cement Plugs Prevents Wear Debris from Back Side of the Cup Liner.
  10. 12 Options For Angle Adjustment